
This tip is from Wayne Lee at Middle Tennessee Lumber in Burns, Tenn.:
One of my frustrations as a tech who repairs lots of sanding equipment is seeing lots of tape on the front of the machines: blue tape, duct tape, electrical tape, masking tape, you name it. People are trying to make some kind of dust shield and also not scrape the shoe mold. The problem is layers of tape gather dust and make it run hotter. What I do is make my own dust skirt with Velcro I get at the hardware store. The adhesive on the Velcro is strong, but to make it stick even better to the aluminum housing I abrade the housing with a Scotchbrite pad, then spray it with Loctite. I wait a minute for that to get really tacky, then apply my Velcro. Doing it this way, I’ve found they last for years. Then you can adjust the height of the Velcro that makes the actual skirt for each grit you’re using, from 36- to 100-grit. (Be sure you adjust it when you’re going from open-coat paper to a medium or fine grit, or it will just fold underneath the edger.)
Watch a video of Wayne explaining this tip in detail:
See a collection of previous job-site tips on our Pinterest Trick of the Trade board. Do you have a Trick of the Trade to share? Email it to WFB. If we use it, we'll send you a WFB T-shirt.



























